Infobyte Pty Ltd. A.C.N. 069 933 884
A.B.N. 55 069 933 884
WHO WE ARE
Infobyte is based in Sydney NSW, Australia (moving to Adelaide SA). The manager and
principal engineer is Geoffrey Veale.
We specialise in the design and manufacture of high quality long
term noise loggers. We also act as a distributor for Microtech
Gefell's range of measurement microphones and accessories.
Each year we create a small number of hand built noise loggers to order. Each unit is built and tested by the designer using discrete electronic components to ensure the highest performance, reliability and reparability. We care about our customers and constantly seek to improve and upgrade our products to protect your investment. The inherent quality and limited availability of our instruments ensures a long life and high retained value.
Latest News
16 February 2011
Infobyte has now reopened our office which is now located in Windsor Gardens, SA
and will be providing hire loggers in the Adelaide area. Arrangements have
now been made to continue hire of loggers in Sydney using Day Design at
Peakhurst as our Sydney agent. Contact Day
Design on 02-9584-2639 to book loggers in Sydney.
11 November 2010
Infobyte is temporarily closed while relocating to Adelaide, SA. Contact on the normal
phone number should still be possible until Friday 12 November. The mobile number (04-2522-7906) will be the most reliable contact method during the
transition period. All hire equipment and manufacturing will be relocating to
Adelaide. Because of the difficulty in processing hire returns after
Friday 12 November normal hire operations will be suspended after today (1
Nov) and are expected to restart in January 2011 from the new Adelaide location.
9 August 2010
Sales of iM4 units have been suspended for next few months, but may start again
in 2011. Units are still available for hire. For any enquiries regarding sales
or hire, please contact me.
18 May 2010
Ongoing development of the iM4 has resulted in a dual position mast mount.
Previously the logger was designed to stand with the carry handle on the top
(case upright) with the mast mounted in the vertical position. The new design
allows mounting in the old position and a new second position allows a vertical
mast with the case flat on the ground as shown in the below picture. Microphone
height above the base of the case is 1.5m with the case standing upright and
1.33m with the case flat on the ground. This gives the user a choice of case
positions to allow placement of the logger in a wider variety of
locations.
Additional information may be found by clicking on the topics below..
Software (updated 31 Aug 2009)