Rounded Corner Templates

Ó kimlizzy2005

Open a new canvas. I used 6x4

Insert Shape: Select the rounded square. Fill with any colour and remove the line.

Insert Shape/Square. Remove the line and fill with a different colour.

Move the square into position at the top left corner. Zoom in so you can see if you have it lined up correctly.

Duplicate the square: Ctrl + d

Your duplicate is already lined up on the left side so using the keyboard arrow keys move it to the bottom left hand corner, again zooming in to make sure you have the bottom edges lined up correctly.

Duplicate the bottom square and use the right arrow key to move it to the bottom right hand position.

Keeping this last square selected fill it with the same colour as the original rounded square.

Recolour the other 2 squares.

Go to Edit/Select All

Right click and "copy"

Go to File/New/Done

Right click and "paste"

Go to Edit/Flatten All Objects

Save as 1round.png

Click on the original file from the stack.

Right click on the bottom left square and "delete".

Edit/Select All. Right click and "copy"

Open a new canvas then right click and "paste".

Edit/Flatten All Objects

Save as 2round.png

Remove the bottom right square.

Edit/Select All. Right click and "copy"

Open a new canvas then right click and "paste".

Edit/Flatten All Objects

Save as 3round.png

You now have 3 templates to use over and over.

Change the colour, fill with a photo or use them as "designer edges". (You must use the right shade of blue to save as designer edges. See this tutorial for instructions: http://scrapbook-bytes.com/cgi-script/tutorials/publish/article_307.shtml

Other examples using different shapes: